Short answer
Yes. Traditional three-coat cement stucco is noncombustible and is one of the exterior wall coverings accepted under California’s wildfire building rules (Chapter 7A) in high fire hazard areas. Applied at full thickness over the right assembly, it can also be part of a one-hour fire-rated exterior wall.
After the recent Los Angeles wildfires, many homeowners rebuilding in Pacific Palisades, Malibu and the Santa Monica Mountains are asking what to put on their exterior walls. Stucco is one of the strongest choices.
Why stucco resists fire
Cement stucco is made of portland cement, sand, lime and water — it doesn’t burn. Traditional three-coat stucco is listed by the University of California’s fire network among siding products that comply as noncombustible under California’s Wildland-Urban Interface rules (Building Code Chapter 7A).
Stucco and fire-rated walls
At full three-coat thickness (about 7/8 inch) over the correct framing and sheathing, stucco can be part of a tested one-hour fire-resistance-rated exterior wall assembly. The rating belongs to the whole tested assembly, so the specific design should come from your plans or a listed assembly.
What else matters in a fire zone
A stucco wall is only as good as its weakest point. Vents, eaves, windows, decks and the gap at the base of the wall all affect how a house performs in a wildfire. Your architect and building department will specify the requirements for your lot.
Building in a high fire hazard zone?
We work across the Santa Monica Mountains, Calabasas, Malibu and the Palisades. We build to the stucco specification on your approved plans and coordinate with your builder. Confirm current requirements with your local building official, since wildfire codes are being updated.
Answered by The Southwest Stucco Family, Southwest Stucco Inc. — CSLB License #702110. Last reviewed .